Hola a tod@s!!!
Este domingo os traemos una idea para hacer collares muy original y facilísima aunque laboriosa. Si queréis ver como se hace, pues aquí va!
Materiales:
– 1 metro de cabo de algodón (del grosor que te agrade)
– Bobina de hilo de un color claro
– Hilos multicolores o de colores vivos (la cola de ratón / rata sirve muy bien)
– Cierre
– Tijeras
– Pegamento
Para hacer este collar los pasos a seguir son:
1. Doblar a la mitad el cabo de algodón.
2. Cortarlo.
3. Pega el cierre.
4. Agarrando el extremo de hilo que no esta enganchado en el cierre, empezamos a enroscar la bobina por los dos cabos. Enroscar hasta que el circulo que queda sea de un tamaño que te guste y haz varios nudos al final. (Mirar las fotos 4 y 5 por si hay dudas).
5. Una vez enroscada la mayor parte del cabo, en lo que queda descubierto cubrirlo con el hilo de color. Este paso es en el que más se tarda ya que cuanto más juntas estén los hilos mejor quedara.
6. Cuando todo este cubierto hacer un nudo. Si lo que has usado es cola de ratón / rata lo podrás quemar un poquito para que quede mejor.
7. Pega la otra mitad del cabo al cierre.
8. Pasa el cabo por dentro del otro circulo y empieza otra vez a enroscar los dos cabos juntos. (Mirar fotos 9,10,11 y 12)
9. Vuelve a enroscar el hilo de color en el otro circulo y haz un nudo.
10. Puedes darle otro toque de color poniéndole tramos de hilo de color por el hilo claro. Y ya lo tienes listo!
Dejarnos un comentario para saber cual os ha gustado más y si decidís probarlo no os olvidéis de mandarnos fotos a nuestro Twitter: @toobigtoolittle y…
¡NOS VEMOS EL PRÓXIMO DOMINGO, UN BESO A TOD@S!
Hi everyone!
This Sunday we have decided to do a necklace fot this summer. It is very original and extremely easy. If you want to see how it’s done, well here it goes!
Materials:
– 1 meter of cotton rope ( the thickness that you like )
– Light color thread
– Multicolor or bright colored thread
– Ending for a necklace
– Scissors
– Glue
The steps to make this necklace are:
1. Fold in half the cotton rope.
2. Cut it .
3. Stick the ending.
4. Holding the end that’s not stuck to the endinf, we begin to thread the rope. Do this until the loop left is of the size you like and make several knots at the end. ( See photos 4 and 5 if there is a doubt ) .
5. Do the same withe the uncovered part and cover it with the colour thread. This step is the one that akes the most, but for the nechlace to look better do it carefully.
6. When it is all covered tie a knot .
7. Stick the other half of the rope to the closing.
8. Put the other half of the rope through the loop and start again to coil the rope . ( See photos 9,10,11 and 12)
9. Again coil the color thread on the new loop and make a knoght.
10. To have more coloure, add color thread on light colour thread. And it’s ready!
We hope you liked it and remember to follow us on Twitter: @toobigtoolittle
And…
SEE YOU ALL NEXT SUNDAY, KISSES!